Mean Well 60W Ultra Wide Input Industrial DIN Rail Power Supply WDR-60 series WDR-60-5
Features :
1∅ and 2∅ , 180~550VAC wide input
High efficiency up to 93%
Built-in active PFC function (240W & 480W)
Assemble on industrial rail TS-35 / 7.5 or 15
Built-in DC OK relay contact
Technical
| MODEL | WDR-60-5 | WDR-60-12 | WDR-60-24 | WDR-60-48 |
|
OUTPUT | DC VOLTAGE | 5V | 12V | 24V | 48V |
| RATED CURRENT | 10A | 5A | 2.5A | 1.25A |
| CURRENT RANGE | 0 ~ 10A | 0 ~ 5A | 0 ~ 2.5A | 0 ~ 1.25A |
| RATED POWER | 50W | 60W | 60W | 60W |
| RIPPLE & NOISE (max.) Note.2 | 100mVp-p | 120mVp-p | 150mVp-p | 200mVp-p |
| VOLTAGE ADJ. RANGE | 5 ~ 6V | 12 ~ 15V | 24 ~ 29V | 48 ~ 57V |
| VOLTAGE TOLERANCE Note.3 | ±2% | ±1.5% | ±1.0% | ±1.0% |
| LINE REGULATION | ±0.5% | ±0.5% | ±0.5% | ±0.5% |
| LOAD REGULATION | ±1.5% | ±0.5% | ±0.5% | ±0.5% |
| SETUP, RISE, HOLD UP TIME | 1000ms, 70ms, 20ms/400Vac 2000ms, 70ms, 10ms/230Vac at full load |
|
INPUT | VOLTAGE RANGE Note.4 | 180 ~ 550Vac or 254 ~ 780Vdc |
| FREQUENCY RANGE | 47 ~ 63Hz |
| EFFICIENCY (Typ.) | 83.5% / 400Vac | 86.5% / 400Vac | 89% / 400Vac | 90.5% / 400Vac |
| AC CURRENT | 0.4A/400Vac 0.7A/230Vac |
| INRUSH CURRENT (max.) | COLD START 50A /400Vac 30A/230Vac |
| LEAKAGE CURRENT | <2mA / 530Vac |
|
PROTECTION | OVERLOAD | 105 ~ 135% rated output power |
| Hiccup mode when output voltage <50%, recovers automatically after fault condition is removed Constant current limiting within 50% ~100% rated output voltage, recovers automatically after fault condition is removed |
| OVER VOLTAGE | 6.2 ~ 7.2V | 16 ~ 18V | 31 ~ 37V | 58 ~ 60.5V |
| Protection type : Shut down o/p voltage, re-power on to recover |
| OVER TEMPERATURE | Protection type : Shut down o/p voltage, re-power on to recover |
| FUNCTION | DC OK SIGNAL | Relay contact rating(max.) : 30V / 1A resistive |
|
ENVIRONMENT | WORKING TEMP. | -30 ~ +85℃ (Refer to "Derating Curve") |
| WORKING HUMIDITY | 20 ~ 90% RH non-condensing |
| STORAGE TEMP. | -40 ~ +85℃ |
| TEMP. COEFFICIENT | ±0.03%/℃ (0 ~ 60℃) |
| VIBRATION | Component: 10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes; Mounting clip: Compliance to IEC60068-2-6 |
| OPERATING ALTITUDE Note.5 | 2000 meters |
| OVER VOLTAGE CATEGORY | Ⅲ; According to EN61558, EN50178, EN60664-1, EN62477-1, EN60204-1; altitude up to 2000 meters |
|
SAFETY & EMC (Note 7) | SAFETY STANDARDS | UL61010, BS EN/EN61558-2-16, AS/NZS 62368.1, EAC TP TC 004 approved; design refer to GL and BS EN/EN60204-1(By request) |
| WITHSTAND VOLTAGE | I/P-O/P:4.7KVAC I/P-FG:2.5KVAC O/P-FG:0.5KVAC O/P-DC OK:0.5KVAC |
| ISOLATION RESISTANCE | I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25℃/ 70% RH |
|
EMC EMISSION | Parameter | Standard | Test Level / Note |
| Conducted | BS EN/EN55032(CISPR32) | Class B |
| Radiated | BS EN/EN55032(CISPR32) | Class B |
| Harmonic Current | BS EN/EN61000-3-2 | Class A |
| Voltage Flicker | BS EN/EN61000-3-3 | ------- |
|
EMC IMMUNITY | BS EN/EN55024, BS EN/EN55035, BS EN/EN61000-6-2, BS EN/EN61204-3 |
| Parameter | Standard | Test Level /Note |
| ESD | BS EN/EN61000-4-2 | Level 3, 8KV air; Level 2, 4KV contact, criteria A |
| Radiated Susceptibility | BS EN/EN61000-4-3 | Level 3, 10V/m, criteria A |
| EFT Bursts | BS EN/EN61000-4-4 | Level 3, 2KV/5KHz, criteria A |
| Surge | BS EN/EN61000-4-5 | Level 4, 2KV/Line-Line, 4KV/Line-Earth, criteria A |
| Conducted | BS EN/EN61000-4-6 | Level 3, 10V, criteria A |
| Magnetic Field | BS EN/EN61000-4-8 | Level 4, 30A/m, criteria A |
| Voltage Dips and interruptions | BS EN/EN61000-4-11 | ＞95% dip 0.5 periods, 30% dip 25 periods, ＞95% interruptions 250 periods |
|
OTHERS | MTBF | 1900.1K hrs min. Telcordia SR-332 (Bellcore) ; 313.7K hrs min. MIL-HDBK-217F (25℃) |
| DIMENSION | 32*125.2*102mm (W*H*D) |
| PACKING | 0.45Kg; 28pcs/13.6Kg/1.24CUFT |
Solutions
We redefine telecom service delivery with AI-augmented site surveys, dynamic planning algorithms, AR-guided technical support, and blockchain-secured maintenance logs. Our global innovation labs and partner ecosystem drive industry-leading solutions.
FAQ :
1.Q: Can I get samples and see how much they cost?
A: Yes, you can get samples. The price for samples is the same as if you bought a lot, and you'll need to pay for shipping them to you. We'll let you know the price when we send the samples.
2.Q: What happens if there's a quality problem?
A: We've been doing this for about 10 years, so we care about doing a good job. If something's wrong, we'll look at why. If it's our fault, we'll fix it like we said in the contract. Our team is here to help you with any questions.
3.Q: How good are the products?
A: They're brand-new, never used, and in new packaging. We test each one before we send it to make sure it's working well.
4.Q: How long is the guarantee?
A: The products are guaranteed for 1 year. If there's a quality problem in that time, we'll help.
5.Q: What do I do if I get a bad product?
A: If it's within the guarantee time, send it back and we'll pay for shipping. We'll replace it with a good one.
Product Tags:
|
|
60W Mean Well WDR-60-5 Rail Power Supply High Efficiency 93% Images
|
